LED Car Hood Vent Light, 60-Inch Neon Accent Strip, Multicolor Startup Scanner Light Bar, 12V High Brightness Neon Lights, with Hard Wiring, for Various Models, Without Battery

4 reviews for LED Car Hood Vent Light, 60-Inch Neon Accent Strip, Multicolor Startup Scanner Light Bar, 12V High Brightness Neon Lights, with Hard Wiring, for Various Models, Without Battery

1. 

   Rated 5 out of 5

   James – April 24, 2025

   Straight Guy 5’10 1m78 tights and skirts in public..
   BUT NOT THIS REVIEW!
   Normally, I review TEMU tights, but this nifty little gadget is fun! (tap text x2 for images and video)…
   MOST importantly, you’ll need one of those ‘Fuse plug connectors’ (see pictures 1 & 2).
   I’ve got a 10A fuse in it.
   This plugs into the Fuse box, in a ‘ACC’ slot. (ACC = accessories, when you turn the key and your dashboard lights come on, you can operate your accessories – Radio etc).
   Each vehicle is different, so just check the Fuse box code – or, if it’s in symbols (like our Land Rover) an ‘ACC’ Fuse slot is indicated by an “Engine Fault” like symbol.
   THE RED WIRE from your light strip connect to the single (red) wire coming out of your Fuse holder (also available cheap on TEMU).
   THE BLACK WIRE (or BLUE) from your light strip goes to the “-” (negative) terminal on your battery. (see photo).
   The light strip wires are low wattage and quite fine, it’s best to solder them to any extension connections you might need.
   …Connect everything with the ignition switched fully OFF.
   When connections are finished, turn the ignition ON for tests.
   … Normally, everything should work fine!
   Just be sure to have it “CENTERED” along the bonnet (stick it on using masking tape & mark the positions on the strip & bonnet with a felt tip pen)..
   With a little patience, it’s relatively easy to peel off the backing tape and inch your way along, pressing gently as you go, sticking the light strip into place.
   Curves up and down can be done by gently easing the strip to the angle you want – then stick it down.
   See Video for the results.
   The light will STAY ON while you have the ignition ON. It turns itself off, when you switch off/remove the keys after about 5 seconds.
   Finally, I think you can only have WHITE lights on the front of your car, here in the UK. (You could check), and the only other thing I’m worried about is that they aren’t toooo bright!
   Alternatively, you should be able to splice the red (live wire) into the live feed for your side or headlights (with an in-line fuse) – the light strip would activate when you switched your lights on!
   Highly recommended! ⭐⭐⭐⭐⭐

2. 

   Rated 5 out of 5

   56***60 – May 20, 2025

   very good and bright, yet to fit ?, thanks, perfect thank you

3. 

   Rated 5 out of 5

   sh***il – June 13, 2025

   excellent

4. 

   Rated 5 out of 5

   co***ct – June 19, 2025

   Excellent quality. Light is beautiful.
   I do not recommend installing according to instructions because it will eat your battery. Better link it to windows relay which turns on only after powering the car.